How to flash the Tecno Camon iACE 2x


If you're reading this post then you own and looking for how to download and flash Tecno Camon iACE 2x KB2j which is bricked, malfunctioning or locked, In this post, I will give the requirements, stages, and measures to take before flashing your device.

You might encounter soft brick, hard brick, boot loop, or other software related problems on this device model and would like to flash the phone with either stock ROM to fix it.

In this content, I will provide the instructions and important steps to take in downloading and flashing the official firmware of the Tecno Camon iACE 2x KB2j.

Before kicking off I would like to let you know that if your device is faulty but can still boot to the home screen then it's important to take the backup of your important files, use the Wondershare mobile software to backup your device files, SMS, contacts, messages and call logs.

How to flash the Tecno Camon iACE 2x KB2j with stock ROM/Official firmware


  • Make sure your Tecno Camon iACE 2x KB2j is well charged.
  • Get a PC or Laptop
  • Take Device Backup - Backup Android Phone files without Root.
  • Mediatek Drivers Installation
  • Firmware/Stock ROM/Flash file Download
  • Flashing the Firmware

Installing Mediatek VCOM drivers

To flash the Tecno Camon iACE 2x KB2j MTK VCOM drivers must be installed, else the phone cannot connect to the PC for flashing.

If you are a Windows 8 or 10 user then you'll be required to disable driver signature enforcement before installing MTK VCOM drivers. Guide to disable driver signature enforcement. Win 8 | Win 10

Stock ROM/Firmware/Flash Download

In this step, you will be required to download the stock ROM/firmware/flash file for Tecno Camon iACE 2x KB2j. Download the firmware that corresponds with your device build no.

List of Tecno Camon iACE 2x KB2j stock ROMs/firmware/flash files

  • Camon iACE 2x KB2j (KB2j-H613G-O-181219V64) Download
  • Camon I Ace 2x KB2j (KB2j-H613KM-O-190103V25) Download

Download Agent (DA) for flashing Tecno Camon iACE 2x KB2j

Tecno Camon iACE 2x KB2j has a Secured Boot which requires DA (Download Agent) DA is a file that enables the flash tool to connect with the secured boot phone.

Also, take note DA file is not generic like it was on older Mediatek phone, if your device is secured boot then you are required to provide the DA for your phone model.

Disclaimer! J5 Tech will not be responsible for any damage that may happen while/after following this guide.

Instructions to flash the Tecno Camon iACE 2x KB2j

Guide to flash the Tecno Camon iACE 2x KB2j firmware using Sp flash tool

Remember you previously downloaded the firmware so the link above is a video and a written guide that explained how to flash the Tecno Camon iACE 2x KB2j with the firmware.

So that’s it, this was all you need to flash your phone. I hope that you found this guide useful.

In case, if you still have some problems or queries, feel free to post them in the comments section down below.

Post a Comment

Post a Comment (0)