How to flash Unisoc/Spreadtrum (SPD) firmware with Miracle Box

In this guide, I will explain how to use Miracle Box to flash a Spreadtrum phone. 

Miracle Box is a tool used for fixing device-related issues such as; forgotten password, pin or pattern, fix NVRAM, or flashing the android phone. 

Warning! Follow the procedures at your own risk. Also, make sure to flash a firmware for your phone model else you will end up with a bricked/dead phone.

Pre-requisites:

• Download Miracle Box
• Install Spreadtrum (SPD) Drivers Win 7 | Win 8/10
• Stock ROM / Firmware
• Spreadtrum (SPD) Android phone / Basic phone
• Original USB cable

Procedures to flash Spreadtrum (SPD) phone with Miracle Box

Follow the below procedures to flash spreadtrum (SPD) phone with Miracle Box

1. Open Miracle Box

2. Click the SPD tab and select Write 

3. Click the scatter-loading button

4. Click the Browse button and it will open a dialog box to browse the firmware file.

5. Locate the firmware file and click Open

6. Click the Start Button 

7. Miracle box will start scanning or waiting or connection to be established then you can switch off the phone and connect the phone to PC with USB cable. 

8. You will get a pop-up like in the below picture then select the file you need to flash if you need to fully flash the phone tick it all and click OK. 

9. Sit back and wait for the flashing process to finish, once it is completed you can switch on the phone, if the phone does not power on long-press the power or disconnect/reconnect the phone's battery.